State-of-the-art Engineering Equipment

WM-102 | Mini Milling Machine

  • Two speed ranges on geared
  • Spring head return
  • Safety shut-off switch
  • Adjustable depth
  • Fine feed head control
  • Clear guard on spindle
  • Rubber chip guards on ways
  • Zero-setting dials
  • Adjustable dovetail ways on column
  • W x D x H: 20″ x 20″ x 30-1/4″
  • Weight: approx. 330kg
Technical Specification
The Mini Milling Machine will handle any kind of job up to 1/2" drilling, 1/2" end mills, and 1" facing. This mill features an MT#3 spindle taper, which only accepts MT#3 collets. The variable speed control and gear drive saves you time and hassle. It has two speed ranges: low range is 0–1100, high range is 0–2500 RPM. Spindle height on this mill is controlled by two methods. The rapid down feed works similar to a drill press. The micro down feed will allow you to make adjustments to 0.001". One full revolution is 0.060". The headstock can be adjusted up and down the column and tilted 45° left or right relative to the table. The limit block can be set when you want to limit the amount of head travel. Repeated hole drilling of the same depth is a perfect use for this feature.
  • 3/8" and 1/2" collets
  • 1/2" drill chuck
  • Two T-nuts
  • Motor: 350W, 110V, single-phase, 4.5A
  • Spindle taper: MT #3
  • Spindle speeds: Variable, 0–2500 RPM
  • Maximum distance spindle to table: 11-1/2"
  • Max distance spindle-to-column: 6-3/8"
  • Table size: 3-5/8" x 15-3/4"
  • T-slots: 3 @ 1-1/8" centers, 7/16" wide
  • Table travel (longitudinal): 7-5/16"
  • Table travel (cross): 4"
  • Head travel: 7-1/2"
  • Head tilt: 45° L/R
  • Drilling capacity: 1/2" mild steel
  • End milling capacity: 1/2"
  • Face milling capacity: 1"