State-of-the-art Engineering Equipment

SM-102.01 | Torsion of Rod and Tube

  • Torsion tests with different metallic specimens to fracture
  • Manual generation of the twisting moment by means of handwheel and worm
  • Specify the input angle via handwheel
  • Long and short specimens of steel, aluminum
  • Movable measuring device for different specimen
  • Measure the test moment by means of strain-gauge measuring shaft and measuring amplifier
  • Strain-gauge measuring shaft with compensation for inherent deformation
  • Twisting angle measured by incremental encoder
  • Electronic measuring & display twisting moment and twisting angle
  • Software for data acquisition via USB under Windows
  • LxWxH: 1400x700x500mm
  • Weight: approx. 43kg
Technical Specification
The torsion test is a destructive testing method that studies the plastic behavior of materials. In practice, components that are twisted in their application (e.g., screws, shafts, axles, wires and springs) are studied with this test method. The experimental unit allows torsion tests in which specimens are subjected to load until they fracture. The clean layout and simple operation mean the experimental sequence can be observed in all details and phases. In the experiment, metallic specimens are twisted until they are destroyed by a typical shear fracture. The twisting moment is applied manually by means of a handwheel and a worm gear. The base plate is torsional reinforced. A transparent protective cover protects against flying fragments. The effective twisting moment is measured by means of a moment-measuring shaft fitted with strain gauges and can be read directly on a display. The twisting angle is recorded by an incremental encoder and can also be read. The measured values are transmitted directly to a PC where they can be analyzed using the software. Specimens of different materials and different lengths are included in the scope of delivery. The measuring device can be moved on the rigid frame to adapt to different specimen lengths.
  • Test rod material: mild steel, aluminum, brass.
  • Test rod holder: 19mm.
  • Test torque measurement using strain gauge measuring shaft.
  • Brass (round)
  • Length: 390mm, Diameter: 10mm
  • Length: 690mm, Diameter: 10mm
  • Steel (round)
  • Length: 390mm, Diameter: 5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm